-
Ever have a problem putting a press fit bearing onto
a shaft?
Use CRC Freeze Spray part # 74086
to chill the shaft prior to inserting the press fit bearing. The chilling
action will shrink the shaft just enough to make the installation much easier
without any effect on the shaft or bearing.
-
Need a quick way to re-tap a stripped hole?
Use CRC Minute Mend Epoxy Putty part # 74070 (4 oz
stick) or 14071 (2 oz stick). Break off a piece
just large enough to fill the hole, and knead together
per instructions. While still soft, insert
Minute Mend into hole to be re-tapped and use the
screw or fastener to “tap” the hole
forming the threads. Retract the screw, and let the
Minute Mend set. Once set, you will have a
freshly tapped hole that will work for a long time.
-
Food Plants – Do you get corrosion or pitting on
metal surfaces after wash down?
Use CRC Food Grade Machine Oil part # 73081 to solve
that problem. Food Grade Machine Oil is USDA and
NSF H1 rated and will provide short term corrosion and
oxidation protection to all metal surfaces after
wash-down. Prior to processing, just wipe down
the surface with a clean damp rag.
- QD® Contact Cleaner & SP-250™ Corrosion
Inhibitor help clean and protect lift controls on
buses. Together these products can help to keep
lift controls working properly. A common
application is in the transportation industry where
lifts are found on many buses. Public buses which
operate in a variety of climate conditions may
experience malfunctions with their lift controls due to
moisture and corrosion. Cleaning these controls
with QD® Contact Cleaner and then applying
SP-250™ will keep them corrosion free!
|
|